pump lubrication
英 [pʌmp ˌluːbrɪˈkeɪʃn]
美 [pʌmp ˌluːbrɪˈkeɪʃn]
泵油润滑；压力润滑
双语例句
- Hand piston pump is suitable for various shipping pumping excluding hard particle or fiber of freshwater and seawater, and lubricant, oil, and other lubrication oils.
手摇活塞泵适用于各种船舶抽送不含硬质颗粒或纤维的淡水及海水，以及润滑油、燃料油，其它润滑性的油类。 - By direct fuel injection pump lubrication and cooling, fuel impurities, and the quality of bad fuel pump will have an early abnormal wear, and shorten the life of fuel injection pump;
喷油泵是靠燃油直接润滑和冷却的，燃油杂质多、品质不良会使喷油泵产生早期的异常磨损，而缩短喷油泵的使用寿命； - At this type of shielding pump for bearing lubrication, cooling and liquid cooling of the electrical flow direction with the basic type is just the opposite.
在此型屏蔽泵中，对轴承润滑、冷却和对电机冷却的液体流动方向与基本型正好相反。 - The other concrete pump system mainly refers to the electrical control system, the lubrication system of cleaning system.
混凝土泵车的其他系统主要是指它的电气控制系统、润滑系统合清洗系统。 - Compared to the common slipper friction pairs, a designed multi-cavity individual bearing slipper of water hydraulic piston pump has better anti-turnover ability and lubrication characteristics.
水压柱塞泵多腔独立支承滑靴副比普通滑靴副的抗倾覆能力更强，具有更好的润滑特性。 - Oil film with a certain range of thickness and figure are the basic prerequisites of a good running condition for port pair in axial piston pump, and also is one of the primary lubrication indicators.
一定厚度与形状的油膜是轴向柱塞泵配流副保持良好工作状态的首要前提，也是衡量其润滑特性的主要指标之一。 - If the compressor, the oil pump and corresponding reverse back, so lubrication oil pump will not work, compressor lubrication will occur, thus make compressor obstacles can't work normally.
如果压缩机倒转，则油泵也相应倒转，这样润滑油泵将无法工作，压缩机的润滑将发生障碍，从而使压缩机不能正常工作。 - Research on Seawater Hydraulic Pump with High Pressure and Seawater Lubrication
基于海水润滑的中高压海水液压泵研究 - Process water is fed to the vacuum pump for lubrication/ cooling.
工艺水进入到真空泵起润滑/冷却的作用。 - By the motor, the growth rate, and pump body, forced lubrication system, a closed circulatory system, such as liquid components.
由电机、增速器、泵体、强制润滑系统、密封液循环系统等部分组成。 - The pump axis is arranged in the alloy pump body through a sliding bearing and the sliding bearing is provided with a spiral oil groove so as to realize the requirement of bearing sliding lubrication.
通过泵轴通过滑动轴承安装在泵体内，并且该滑动轴承具有螺旋型油槽，可以实现轴承动润滑的要求。 - Design the Piston Ring and Extension Ring of Reciprocating Vacuum pump which is Vertical, Lubrication without Oil
立式半无油往复式真空泵活塞环和张力环的设计 - The greasing ( interval) time and monitoring time are set by using the monitor, the pressure in main lines is detected and the pump operating time is adjusted by using the pressure sensor in order to carry out auto-greasing timing and fault alarm function for lubrication system.
通过监控仪进行加脂间隔时间和监控时间的设定，通过压力开关检测主油路工作压力，并对油泵的工作时间进行自动调节，实现系统的定时自动加脂与故障报警功能。 - By a new type design structure for fluid end and power end of high pressure reciprocating pump with combination valve, bidirectional combined seal, inverted lubrication mode and new corrosion-resistant material the key technical problem of reliability for high pressure water-injection pump is solved.
结合高压往复泵液力端和动力端采用倒润滑方式、组合阀、双导向组合密封、新耐蚀材料等新设计与结构进行了分析；解决了高压注水泵的可靠性关键技术问题。 - When engineering machinery work in operating conditions of a steep slope which exceeds the inclined angle permitted in common engineering machinery, the oil pump will suck air to damage normal lubrication and engine.
工程机械在大坡度工况下作业，超过普通工程机械允许的倾斜角度时，机油泵会吸入空气，破坏正常的润滑，造成机损。 - We present a new method of designing the piston ring and extension ring achieved from making designs for the LVP type reciprocating vacuum pump which is vertical, lubrication without oil. This method is useful to the designer and user of the vacuum pumps.
我们在设计LVP型立式半无油往复式真空泵的过程中，对活塞环和张力环的设计进行了些探讨和研究，现介绍如下，以供设计者和用户参考。 - Electric thin oil pump station is selected to ensure permanently good lubrication in work process of the hammer.
选配电动稀油泵站，保证潜孔锤在工作过程中始终得到良好的润滑； - Recently, there is few research achievements and products about water hydraulic gear pump because many serious problems exist in water hydraulics, such as the leak and seal, wear and lubrication, corrosion and cavitation, etc..
由于水液压传动时存在严重的泄漏与密封、磨损与润滑、腐蚀与气蚀等主要问题，水液压齿轮泵尚无研究成果和产品问世。 - Design of Emulsion Pump and Lubrication Pump
乳化液泵润滑泵设计 - The system includes high efficient minisize gear pump, embeded control system and vehicle network based on CAN-bus. After using chassis centralized lubrication system, chassis life span can be prolonged, chassis fault can be effectively reduced under battlefield environment.
系统采用高效润滑泵、嵌入式控制系统及车内CAN总线网络扩展技术，大大提高了大型军车底盘的寿命，可有效地减少战场环境下的底盘故障。 - The Synthetic Analysis of Application of Mechanical Sealing in Eccentric Pump and its Lubrication
机械密封在离心式水泵上的应用及其润滑的综合分析 - Development and performance of micro-oil pump for oil-air lubrication
油气润滑用微型油泵的性能 - This paper introduces the method of calculating minimum oil film thickness between teeth of gear pump on the basis of elastohydrodynamic lubrication theory, with achieving computer-aid-analysis.
本文根据弹流理论，介绍了计算齿轮泵齿间最小油膜厚度的方法，并且实现了计算机辅助分析。 - Fault analysis during oil pump switch of coal pulverizer lubrication station
磨煤机润滑油站油泵切换故障分析 - The new pump can effectively improve the oil pressure and fuel supply to meet the lubrication requirements.
由计算结果的对比可知，新机油泵能有效地提高主油道压力及供油量，满足润滑要求。 - It adopts magnetic force to suspend the impeller rotor, so the pump has several advantages, such as no friction, no contact, no lubrication in blood pump, lower energy consumption and longer lifetime.
由于采用磁力使叶轮转子悬浮在泵体内，它具有无摩擦、无接触、无需润滑、能耗低、寿命长等优点。 - In blood pump research process, the researchers are stranded continuously by the question of lubrication and the seal between the mechanical movement parts.
在血泵研究过程中，机械运动部件间的润滑与密封一直困绕着广大研究人员。 - According to the wear of the hydraulic pump, the lubrication program was designed. Lubricating oil was used to solve the wear problems on the high-speed heavy eccentric shaft and bearing.
根据水压泵的磨损研究，设计了该泵的润滑方案：在高速重载的偏心轴和轴承上表面进行硬质化处理并涂抹润滑脂以解决磨损问题。